manualshive.com logo in svg

SUNSTONE Linear DC, Руководство пользователя

Поделиться
Скачать
SUNSTONE Linear DC Скачать руководство пользователя страница 39

39

instructions for metals, consumables, coatings, cleaners, and degreasers.

•  Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays 

of the weld can react with vapors to form highly toxic and irritating gases.

•  Do not weld on coated metals, such as galvanized, lead, or cadmium-plated steel, unless 

the coating is removed from the weld area, the work area is well ventilated, and the operator 
is wearing an air-supplied respirator. The coatings and any metals containing these 
elements can give off toxic fumes if welded.

SAFETY PRECAUTIONS FOR FALLING EQUIPMENT

  

•  Use a working surface of adequate physical strength to support the welding 

unit during operation or storage.

•  Secure welding unit during transport so that it cannot tip or fall.

MAGNETIC FIELDS CAN AFFECT IMPLANTED MEDICAL DEVICES

  

•  Wearers of pacemakers and other implanted medical devices should keep 

away.

•  Implanted medical device wearers should consult their doctor and the 

device manufacturer before going near arc welding, spot welding, gouging, 
plasma arc cutting, or induction heating operations.

OVERUSE CAN CAUSE OVERHEATING

  

•  Allow a cooling period between strenuous welding schedules; follow rated 

duty cycle. 

•  If overheating occurs often, reduce duty cycle before starting to weld again.

Principal Safety Standards

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,from Global Engineering 
Documents (phone: 1-877-413-5184, website:www.global.ihs.com).
OSHA, Occupational Safety and Health Standards for General Industry, Title 29, Code of Federal 

Содержание Linear DC











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды