USING THE MENUS
Save to USB:
Press button to select Save to USB, then press ENTER
button to confirm, it will display "OK" after 4 seconds if the
operation is successful. If you view USB drive content can be
found a new document "DATABASE.BIN".
Recover from USB:
Clone
Save to USB
Recover from USB
Use the resulting "DATABASE.BIN" files, press
button
to select "Recover from USB" and press "ENTER" button to
confirm, it will into standby mode automatically after 4 seconds
if the backup data has been covered successfully.
p
/
q
Note
: Do not change the factory setting in the menu, or may cause the TV does not work properly.
Hotel Lock:
Press
t
/
u
button to select ON or OFF.
Source Lock:
Lock the input signal.
Default Source:
Set the input signal mode when you switch on the TV.
Default Program:
Set the program number when you switch on the TV.
Max Volume:
Set the maximal volume of the volume.
Clear Lock:
Clear all lock in the hotel setting menu.
Clone:
This function allows you clone the desired settings, and used to additional Tv’s for some mode. The operation
is below:
1. Insert a USB drive to the USB connector.
2. Press button to select Clone, then press ENTER button to enter.
p
/
q
p
/
q
20
DVD SETUP-ENABLE
:
Set the function on or off. If set on, the DVD function buttons of remote control will disabled.
