EXIT
MENU
ENTER
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Standard
Move Channel
1. In Program Edit, move the
p
/
q
button to select a channel which you want to moved.
2. Press the YELLOW button to summon the move function.
3. Press the
p
/
q
button to select a channel you want to move to.
4. Press the YELLOW button to perform the move function.
Skip Channel
1. Press the
p
/
q
button to select a channel which you want to skipped.
2. Press the CYAN button to perform the skip function.
Set FAV Channel
1. Press the
p
/
q
button to select a channel which you favorite.
2. Press the FAV button to perform the favorite function.
CI Information:
Display CI card information.
USING THE MENUS
13
1. Press the MENU button on the remote
controller to display the OSD main menu.
2. Press
t
/
u
button to select the PICTURE menu.
3. Press
p
/
q
button to select each item.
4. Press the MENU or EXIT button to exit from the menu.
PICTURE SETUP
Picture Mode:
Select a desired picture mode among
Dynamic, Standard,Mild
and
User
.
Dynamic, Standard
and
Mild
are the factory preset picture mode and the parameter of those modes can not be changed. If
you want to adjust any items (e.g. Contrast, Brightness ,Clour and sharpness etc), please select
User
, and the settings will be stored in
User
mode.
C
You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast:
Adjust the color brightness of the image.
Brightness:
Adjust the darkness and lightness of the image.
Color:
Adjust the saturation level of color.
Sharpness:
Adjust the sharpness level of image.
Tint:
Adjust the tone of color when your system is in NTSC.
0
50
50
50
50
