SunStar SC-7007S, Руководство пользователя

Страница: 15 / 23

15
3
Control and Adjustment of the Sewing Machine
Caution
▶
Always turn off the power when mounting a needle. If the operator mistakenly steps on the pedal
while the power is on, the machine will start automatically and can result in physical injuries.
▶ When using clutch motor, be aware that the motor will continue to rotate for a while even after the
power is switched off due to inertia. Start to work on the sewing machine only after the motor has
come to a complete stop.
1) Needle Insertion
With the needle groove
①
facing left, insert the needle tip
into the upper end of the stopper hole
②
and fasten the
needle with the clamp screw
③
. (See Fig. 15)
[Fig. 15]
2) Adjustment of needle bar
As in Fig. 14, remove the needle bar adjusting rubber plug
①
from the face plate and spin the pulley to place the needle
bar at the lowest position. Loosen the needle bar holding
screw ② and move the needle bar to align the lower end of
the needle bar lower bushing
③
with the punch mark
④
of
the lowest position of the needle bar. Then tightly fasten the
needle bar screw
②
and put back the rubber plug
①
to the
original position.
[Fig. 16]