SunStar KM-235A Скачать руководство пользователя страница 6

Страница: 6 / 25

KM-235 Series are intended to be used for industrial purposes for sewing textiles and

other similar materials. Carefully study the following instructions before operating the

machine.

ⓐ

Read the manual thoroughly and understand the instructions fully before use.

ⓑ

Put on proper safety garments.

ⓒ

While the machine is in motion, keep your hands or any part of your body away from

moving parts, e.g., needle, hook, thread take-up lever and pulley, etc.

ⓓ

Do not remove any form of safety covers while the machine is in use.

ⓔ

Be sure to connect the ground (earth) wire.

ⓕ

Before opening electric boxes such as the control box, shut down the power supply and

make sure the power switch is in

“

off

”

mode.

ⓖ

Stop the machine before threading the needle or checking after sewing work is finished.

ⓗ

Never turn the power switch on with the pedal down.

ⓘ

Do not use the machine if the cooling fan is clogged. Clean the air filter embedded in the

control box at least once a week.

ⓙ

Keep the machine away from strong electromagnetic fields such as high-frequency

welding machines.

1-4) Machine

operation

Caution

ⓐ

Safety label: Safety instructions for machine operations

ⓑ

Thread take-up lever cover: A device designed to prevent the human body from coming

in contact with the thread take-up spring

ⓒ

Belt cover: A device intended to avoid potential risks of getting hands, feet or clothes

jammed by the belt

ⓓ

Finger guard: A device built to keep fingers away from the needle.

1-5) Safety device

Caution

Always start the machine with safety covers in place since

fingers or hands could be injured or cut off by the belt. Turn off

the power switch when conducting a regular check on the

machine.

ⓓ

ⓐ

ⓒ

ⓑ

Содержание KM-235A


























Результаты поиска

Содержание KM-235A

Отзывы:

Похожие инструкции для KM-235A

Бренды по названию

Популярные бренды

SunStar KM-235A, Руководство пользователя

Результаты поиска

Содержание KM-235A

Отзывы:

Похожие инструкции для KM-235A

Бренды по названию

Популярные бренды