manualshive.com logo in svg

SunStar KM-235A, Руководство пользователя

Поделиться
Скачать
SunStar KM-235A Скачать руководство пользователя страница 10

10

Warning

▶

Do not connect the power plug before lubrication is complete.  If the user mistakenly steps

on the foothold, the machine will start automatically and can cause physical injuries.

▶

When handling lubricants, put on protective glasses or gloves to avoid contact with eyes or

skin.  Otherwise, inflammation can be caused.  Do not drink lubricants to prevent diarrhea

and vomiting.   Be sure to keep the lubricants out of the reach of children.

▶

Be sure to feed oil when using the machine for the first time, or when the machine has

been left unused for a long time.

3) Lubrication

A. Installing a magnet for removing metal chips Place the

chip-removing magnet from the accessory box onto the

oil pump inside the bed.  (Refer to Figure 3)

※

Do not use the magnet for other purposes.

Operating the machine without the magnet can

cause malfunctions.  Use the magnet to ensure

durability of the machine.

B. Feeding oil to the oil pan

a) Feed the oil to the 

“

HIGH

”

mark.  (Refer to Figure 4)

b) Be sure to use the oil for SunStar industrial-use

sewing machines or TELLUS C10 from SHELL.

c) When the oil is down to LOW level during

operation, immediately fill up the oil to HIGH level.

d) Replace oil at least once every two weeks.

Magnet

[ Figure 3 ]

[ Figure 4 ]

Oil pump

Содержание KM-235A


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды