manualshive.com logo in svg

SunStar KM-1957-7, Руководство пользователя

Поделиться
Скачать
SunStar KM-1957-7 Скачать руководство пользователя страница 7

7

KM-1957 Series is made to sew patterns on fabrics and other similar materials for industrial
use. 
Follow the following indications when operating the machine.

ⓐ

Read through this manual carefully and completely before operating the 
machine.

ⓑ

Wear proper clothes for work.

ⓒ

Keep hands or other parts of the body away from the machine’s operation 
parts(needle, shuttle, thread take-up lever, pulley, etc.) when the 
machine is operating.

ⓓ

Keep the covers and finger guard on the machine during operation.

ⓔ

Be sure to connect the earthing conductor.

ⓕ

Turn off the main power and check if the switch is turned 

“

off

”

before opening electric boxes such as the control box.

ⓖ

Stop the machine before threading the needle or checking after work.

ⓗ

Do not step on the pedal when turning the power on.

ⓘ

If possible, install the machine away from source of strong electrical noise 
such as high frequency welding machines

1-4) Operating

machine

Warning

Notice

[ Warning ]
Set the machine in motion after installing necessarily a motor cover and a backside cover
and turn off when monitoring or adjusting.

1-5) Safety devices

ⓐ

Safety label : It describes cautions during the machine operation.

ⓑ

Thread take-up cover : It prevents any contact between body and take-up lever.

ⓒ

Motor cover : A device to prevent hands, feet and clothing from getting jammed by the motor.

ⓓ

Backside cover : Device for preventing contact between B/T cylinder and body.

ⓔ

Label for specification of power : It describes cautions for safety to protect electric shock
during the motors’ rotation. (Voltage input / use Hz)

ⓕ

Finger guard : It prevent contacts between finger and needle.

ⓖ

Upper shaft cover: Device for preventing contact between upper shaft and body.

ⓗ

Upper cover : Anti-finger trapping and insertion of foreign debris device

ⓑ

ⓒ

ⓔ

ⓕ

ⓗ

ⓖ

ⓓ

ⓐ

Содержание KM-1957-7












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды