manualshive.com logo in svg

SunStar KM-1957-7, Руководство пользователя

Поделиться
Скачать
SunStar KM-1957-7 Скачать руководство пользователя страница 11

11

44

Installation

4-1. Installation place

1. Do not install the machine near television, radio or

telephone; or the operation of machine can be interfered with
by the noise from the appliances. 

2. Connect the ground (earth) wire. An unstable connection

may result in malfunction

4-2. Machine delivery

1. There should be two people to move the machine, as in the

Figure. 

4-3. Bending the machine backwards

1. Bend the machine backwards with two hands grabbing

upper part of the body.  Make sure to press the lower part of
the board leg of the machine, or the whole body of machine
falls backwards, leading to physical injuries. 

[ Figure 3 ]

[ Figure 1 ]

[ Figure 2 ]

Notice

·

Only trained technicians should install and wire up the machine. 

·

The machine weighs over 55kg.  More than two persons should install the machine.

·

Do not plug in the machine until installation is completed.
If the operator mistakenly steps down on the pedal with the plug in, the machine will start
automatically and can cause physical injuries.

·

Use both hands when bending the machine backwards or returning it to the original position.

Using only one hand can lead to severe hand injuries due to the weight of the machine.

Содержание KM-1957-7












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды