SunStar KM-1080 Series Скачать руководство пользователя страница 40

Страница: 40 / 43

8.11) Trimmer

8.11.1) Adjustment of Moving Blade

The moving blade

①

feeds the upper and lower

thread to the fixed blade. The moving blade

①

conducts the rotary movement to the extent that it

does not touch the bobbin case. Trimming is

conducted through the contact with the fixed blade

②

at the 1/3 point in length. Adjustment can be made in

the following order.

1) Loosen the fixing screw for the moving blade

shaft crank

③

2) When the thread take-up lever is at the highest

point, adjust the tip of the moving blade to be

1mm away from the fixed blade.

3) Press the moving blade. While the moving blade

shaft crank

④

is being lifted, tightly fasten the

fixing screw for the moving blade shaft crank

③

①

[Fig. 8-18]

②

③

④

8.11.2) Fixed blade and Lower Thread Holder

The moving blade

①

contacts the fixed blade

②

the 1/3 point of its length to conduct trimming as

safe as possible with the minimum pressure. When

trimming is made, the lower thread holder

③

contacts

the moving blade

①

, securely holding the lower

thread. Adjustment can be made in the following

order.

1) Insert the lower thread holder

③

and the fixed

blade

②

into the groove on the fixed blade base

④

, and tightly fasten them using the fixing screw

⑤

and the tightening screw

⑥

2) Adjust the top of the fixed blade and the top of

the moving blade to overlap.

Place the moving blade at the 1/4 or 1/3 point of

the fixed blade. Make sure that the fixed blade

stays firm, and tightly fix the fixed blade using

the fixed blade base fixing screw

⑦

③

①

⑦

⑤

⑥

④

②

[Fig. 8-19]

Содержание KM-1080 Series












































Результаты поиска

Содержание KM-1080 Series

Отзывы:

Похожие инструкции для KM-1080 Series

Бренды по названию

Популярные бренды

SunStar KM-1080 Series, Руководство пользователя

Результаты поиска

Содержание KM-1080 Series

Отзывы:

Похожие инструкции для KM-1080 Series

Бренды по названию

Популярные бренды