manualshive.com logo in svg

SunStar KM-1060BL, Руководство пользователя

Поделиться
Скачать
SunStar KM-1060BL Скачать руководство пользователя страница 9

9

2

Installation

1) Oil fan

Fix oil tray

①

and oil tank

②

from the accessory box onto oil

fan

③

as shown in the Figure 1, then secure the oil fan under

the table

④

using six nails. 

2) Machine head

Nail the rubber cushion

②

onto hinge rubber

①

and four

edges, then install the head hinge

③

in the sewing machine

with the head inserted in the bed.  

[ Fig. 

1 ]

[ Fig. 

2 ]

①

②

③

④

③

①

③

②

②

Warning

▶

The machine must be installed by a trained technician only.

▶

Any electrical wiring must be performed by a qualified technician or agent.

▶

The machines weigh over 52 kg.  As such, two or more people should carry out the installation.  

▶

Plug in only after the installation is complete.  If the operator mistakenly steps down on the pedal
with the plug in, the machine will start automatically and can cause physical injuries.

▶

Connect the ground (earth) wire.  An unstable connection may result in an electric shock or a
malfunction.

▶

Place the belt cover on top of the machine

▶

Use both hands when bending the machine backward or returning it to the normal position.
Using only one hand can lead to physical injuries due to the weight of the machine.

Содержание KM-1060BL









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды