Sunrise Medical Zippie VOYAGE Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 32

Sunrise Medical Zippie VOYAGE Скачать руководство пользователя страница 18

ZIPPIE VOYAGE

Q.

ANGLE ADJUSTABLE STROLLER HANDLE

To adjust the Handle

The handle

angle

is adjustable for pushing comfort.

a.

The adjustment is made from the back of the device. Depress both stroller handle pivot
buttons (F) simultaneously, and adjust to desired angle.

b.

Release the buttons and allow the stroller handle to lock into place.

29

VIII. USE AND MAINTENANCE

245797 Rev. A

18

XI. DEALER SERVICE AND ADJUSTMENTS

A. POSITIONING AND GROWTH ADJUSTMENTS

WARNING

If a change in adjustment is necessary for growth or positioning, a healthcare professional must be
consulted before any changes are made.  These adjustments are very important to the orthopedic and
neurological needs of the child.  Care should be taken to make sure the changes are physiologically and
medically appropriate.  Sunrise Medical suggests that any positioning or growth adjustments be made by
your service provider.  Do not allow any adjustments while the child is seated in the mobility device.

If you plan to adjust and maintain this device yourself, Sunrise recommends that you use a torque
wrench.

NOTE -

The torque wrench must measure inch-pounds. You may buy a torque wrench and proper

metric sockets from any local hardware store.

1. Torque settings:
A torque setting is the optimum tightening which should be made on a particular fastener. It is
important to use proper torque settings where specified. When not specified, torque settings
should be: M5 fasteners = 44 in-lbs (5 Nm), M6 fasteners = 62 in-lbs (7 Nm), M8 fasteners = 88 in-lbs
(10 Nm). For all others torque setting should be 60 in-lbs (6.8 Nm).

2. Dealer Service and Adjustment Reference materials:
Go to www.sunrisemedical.com for parts manuals, instruction sheets, and instructional videos that
will aid in the repair of the Quickie/Zippie Family of wheelchairs.

In general, positioning and growth adjustments should be done in the following order:

1. Adjust seated area
2. Adjust back support area
3. Adjust pelvic positioning belt
4. Adjust foot

plate

5. Adjust head support(s)
6. Make other standard and optional adjustments that are needed
7. Check to be sure that all adjustment screws are torqued to specifications.

TOOLS YOU WILL NEED
1. Imperial Hex key set
2. Metric Hex key set
3. Imperial Open-end Wrench set
4. Metric Open-end Wrench set
5. Torque wrench
6. Imperial Hex bit Socket set
7. Metric Hex bit Socket set
8. Phillips and Flat screwdrivers

29

F

2

8

C

2

7

B

P. CANOPY INSTALLATION AND ADJUSTMENT

WARNING

It is always best to make sure the dependent is not seated in the mobility device during the
installation of accessories.

Canopy installation

a.

From behind your mobility device, attach the canopy to the seating shell receivers (

B

)

.

b.

Check that the canopy has been installed correctly by visual inspection and checking for
looseness, or an incorrect attachment. The plastic tabs (

C

) must be locked into place for safe

operation.

2

8

2

7

«
...
16
17
18
19
20
...
»

Содержание Zippie VOYAGE

































Отзывы:

Нет отзывов