Sunrise Medical Zippie VOYAGE, Руководство пользователя, Страница: 13 / 32

ZIPPIE VOYAGE
E. UNFOLDING AND FOLDING BASE FRAME
WARNING
Zippie dependent mobility devices are designed for stability and performance. When unfolded, the device
must be fully open and locked to avoid injury to the dependent rider. Follow the instructions for
unfolding the device carefully, and double-check that the device is fully locked before adding the seating
shell and rider.
Unfolding:
a.
b.
Unsnap the storage lock (A) from around the folded frame. It should remain attached to the
frame for future use.
Pull up on the upper frame (B) until it locks into place. It may be necessary to put your foot on
the bottom bar while pulling up on the upper frame. Fig. 7.
c. Rear wheels and front casters can now be attached if they are not attached already.
Folding:
WARNING
The Voyage is not intended to be folded with the seating system installed. ALWAYS
remove the seating system prior to folding the base. Failure to do this may damage the
product.
a.
Remove child from the seating s ystem , then remove the seating s ystem from the base
(refer to sub-section J ) .
b.
Unlock the front caster wheels.
c.
Return handle to the straight position as show in Figure 8.
d.
Set parking brake.
e.
Pull up on both triggers ( D ) at the same time. This action will release the frame lock.
Continue pulling up on the triggers while pushing down on the upper frame.
f.
Push handle down to begin folding of the base .
g.
Lift on the center tube of the Slide-N-Lock (C) . Fig. 7.
h.
Snap the storage lock (A) around the upper frame to prevent the frame from opening when
transporting, or storing the frame.
NOTE - Rear wheels, or front casters do not have to be removed for this procedure,
but may be removed to save space for storage.
Do not force the base open or closed if it sticks during unfolding or folding, damage
could occur.
6 5
8
7
5
8
VIII. USE AND MAINTENANCE
13 245797 Rev. A
5
A
6
B
7
D
B
B
C
7