Sunrise Medical Quickie F40, Руководство пользователя

Страница: 24 / 48

Issue 6 20
By pressing the actuator button
again you return into the drive
mode.
Controller Warnings
Ensure that you always have
comfortable access to the controls
whilst the chair is moving and
make sure that the controller
is fixed securely to the chair.
It is important that the joystick
boot is replaced if it is torn or
brittle, failing to do so could cause
substance damage to the
controller and unexpected
movement of the chair.
Do not replace the joystick knob
with any unauthorised item. It may
cause hazardous operation and
loss of control of the chair.
Please ensure that the control
system is switched off prior to
cleaning.
Cleaning instructions
Should the control of your
wheelchair become soiled or dirty,
it can be wiped with a damp cloth
with a dilute disinfectant until
clean. This is important should the
wheelchair be used by more
than one person to ensure there is
no cross infection.
!! Control system to be switched off
prior to cleaning!!
Programming port
Hand Control: The programming
port is placed in the bottom front of
the pod.
No hand control: The programming
connected.
- If the number of bars on is 5:
Electrical fault in the right motor.
- If the number of bars on is 6:
The battery charger is plugged
in.
- If the number of bars on is 7:
Fault in the control.
- If the number of bars on is 8:
Fault in the control system.
Make sure the control system
connections are secure.
- If the number of bars on is 9:
Fault in the electro-magnetic
brake.
- If the number of bars on is 10:
Excess voltage.
- To operate the lights and
indicators press the relevant
switch for the on and off
operation. To operate the
actuators press the actuator
button in front of the joystick.
A left or right movement of the
joystick selects the tilt or back
actuator. A LED will indicate
the option selected. Moving the
joystick forwards and backwards
changes the angle of the seat
option chosen.
VR2