Sunrise Medical QUICKIE ACCESS EIR14, Руководство пользователя

Страница: 22 / 32

Quickie
®
ACCESS
™
252849 Rev. B 22
H. SINGLE-POST ARMREST RECEIVER
1. Adjusting Armrest Receiver Fit
To tighten or loosen the fi t of the armpost in the receiver:
a.
Loosen the 4 set screws (K) by using a 5/64-in Hex Key.
b. With the armrest assembly in the receiver (L) press fi rmly on the outside of the receiver.
c. Maintain pressure on the receiver and tighten again two of the set screws (K).
d. Remove the armrest assembly and tighten again the remaining two set screws.
e. The armrest will fi t fi rmly in the receiver and lessen any noise that may result from vibration.
2. Moving the Receiver location
a. Loosen the 3 bolts (J) holding the clamp halves (I) together (do not remove them).
b. Slide the clamp so that armrest is at the correct position.
c. Tighten the 3 bolts (J).
I. ADJUSTABLE LOCKING FLIP-UP ARMRESTS
1. Height Adjustment
a. Loosen bolt (A) and nut and remove fl ip-back tube.
b. Loosen bolts (B, C) and remove clamp (D).
c. Move the clamp (D) up or down to the desired position.
d. Tighten bolts (B, C).
e. Position the fl ip-back tube back in place and tighten bolt (A).
f. Repeat the process for the other armrest.
2. Angle-Adjustment
a. Loosen bolt (E).
b. Set armrest at desired angle using preset holes in armrest angle plate.
c. Tighten bolt (E).
3. Length-Adjustment (optional)
a. Remove foam grip or armpad (G) from armrest.
b. Loosen the nut and screw (F) in the adjustable fl ip-up tube.
c. Reposition the sleeve (H) at the desired length.
d. Tighten again the screw (F) and nut.
e. Put foam grip or armpad (G) back in place.
36
36
IX. DEALER SERVICE AND ADJUSTMENT
35
35
I
J
K
L