Quickie
®
ACCESS
™
252849 Rev. B
15
VIII. USE AND MAINTENANCE
E. TROUBLESHOOTING CHART
L
ef
t turn in c
ha
ir
Right turn in c
ha
ir
L
ooseness in c
ha
ir
Slug
gish turning
Squea
k
s a
nd rat
tles
Ca
ster fl
ut
ter
Cha
ir dr
ops f
as
t into tilt a
nd
is ha
rd to r
eturn
Cha
ir is ha
rd to tilt a
nd
returns too f
as
t
Solution
R
R R R
Ensure tire pressure is correct and equal in both rear tires and
front caster tires, if pneumatic.
R R R R
Ensure all nuts and bolts are tight.
R
R
Ensure all spokes and nipples are tight on radial spoke wheels.
R
Use Tri-Flow Lubricant (Tefl on® based) between frame
connections and parts.
R
R
R
R
Check for proper caster plate adjustment. See instructions for
caster plate adjustment.
R
R
R
Ensure both front casters touch the ground simultaneously.
If they do not, add the proper spacers between the bottom
bearing of the caster plate and fork stem nut until they do.
Ensure you check for this problem on a fl at surface.
R
Consult with an authorized dealer to adjust CG/CR forward
R
Consult with an authorized dealer
Symptoms
F. TO MOUNT AND REMOVE REAR WHEELS
Do not use this chair UNLESS you ensure both quick-release axles are locked. An unlocked axle may come
off during use and cause a fall.
NOTE– Axle is not locked until the quick-release button (A) pops out fully.
1.
To Attach Wheel
a.
Depress quick-release button (A) fully. This will release tension on ball bearings at other end.
b.
Insert axle through hub of rear wheel (B).
c.
Keep pressure on button (A) as you slide axle (C) into axle sleeve (D).
d.
Release button to lock axle in sleeve. Adjust axle if it does not lock.
e.
Repeat steps on other side.
2.
To Remove Wheel
a.
Depress quick-release button (A) fully.
b.
Remove wheel by sliding axle (C) out of axle sleeve (D).
c.
Repeat steps on other side.
G. CUSHION PLACEMENT
Place cushion on seat pan with hook material side down. The beveled edge of the cushion should be in front.
Press it fi rmly into place.
11
11
Содержание QUICKIE ACCESS EIR14
Страница 30: ...252973 Rev A 30 NOTES...
Страница 31: ...252973 Rev A 31 NOTES...