Quickie
®
ACCESS
™
252849 Rev. B
18
O. LENGTH-ADJUSTABLE LOCKING FLIP-UP ARMRESTS
(Option)
1.
Height Adjustable
a
.
Remove the hex nuts from the armrests (A) and angle adjustment plate (B) to release the
armrest and plate.
b.
Release the bolts from the arm mount (C).
c.
Move mount up or down the back post in 1-inch increments for desired height, or within the
arm mount holes for 1/4-inch increments.
d.
Replace and tighten nuts and bolts.
2.
Angle Adjustment
a.
Loosen the hex nut from the angle adjustment plate (B).
b.
Tilt the armrest and plate to the desired angle.
c.
Tighten nut.
3.
Length Adjustment
a.
Loosen set screw (D) on underside of adjustable armrest.
b.
Set armrest to desired length.
c.
Tighten set screw (D).
NOTE:
Do not set length of armrest longer than frame depth.
P. SWING-AWAY HANGERS/FOOTRESTS
Swing-in-Swing-out Hangers and Foot
rests (60°, 70º, 80°)
1.
Attachment
a.
Place swing-in/swing-out pivot saddle (A) into the receiver (B) on front frame tube with the
footrest facing inward or outward from the frame.
b.
Rotate the footrest inward until it locks into place on locking plate.
2.
Removal
a.
To remove footrest, release latch (C) by pulling lever upward or pushing lever downward.
b.
Rotate footrest inward or outward and lift.
Q. ARTICULATING LEGREST (Option)
Attachment or Removal
To attach or remove Articulating Legrest (ALR) see instructions for Swing-away Footrest attachment.
1.
Elevation Adjustment
a.
To raise legrest, lift to desired position. Legrest will automatically lock in place.
b.
To lower legrest, while seated in chair, press release lever (D) down and lower legrest to desired
position. Legrest will automatically lock in place.
2.
Height Adjustment of the Calf Pad
a.
Rotate the tube clamp (E) towards the outside.
b.
Slide calf pad assembly up or down.
c.
Rotate calf pad assembly (F) back in the desired indented position.
R. ELEVATING LEGREST (Option)
1.
Attachment or Removal
To attach or remove Elevating Legrest (ELR) see instructions for Swing-away Footrest attachment.
2.
Elevation Adjustment
a.
To raise legrest, lift to desired position. Legrest will automatically lock in place.
b.
To lower legrest, while seated in chair, press release lever (G) down and lower legrest to
desired position. Legrest will automatically lock in place.
20
21
VIII. USE AND MAINTENANCE
22
23
24
20
21
22
23
24
Articulating
legrest
Elevating
legrest
D
E
F
G
D
B
A
C
Содержание QUICKIE ACCESS EIR14
Страница 30: ...252973 Rev A 30 NOTES...
Страница 31: ...252973 Rev A 31 NOTES...
