Sunrise Medical QUICKIE 2 Millenium, Руководство пользователя

Страница: 27 / 63

23 2 Millennium Issue 7
1
2
3
Footplates
Fig. 26
Fig. 27
Amputee support pad
To adjust the position and height of
support pad (Fig. 27), loosen bolts
(1) using a 5mm Allen key and slide
mounting block (2) to desired
position and support bar (3) to
desired height. Tighten the screws
to 7-12Nm torque.
To adjust the angle of the support
pad, loosen the bolt (4) using a
13mm A/F spanner, angle to the
desired position and tighten the bolt
to 12-17Nm torque.
Angle adjustment of 90°
adjustable flip up footplate
To adjust the angle of the footplate,
(Fig. 26) loosen the two retaining
screws (1) sufficient to allow the
footplate (2) to rotate. Rotate the
footplate to the desired angle and
tighten the screws to 7-12Nm
torque, using a 4mm Allen key.
Forward or backward adjustment
The footplate can also be moved
forwards or backwards (Fig. 26)
by removing the two screws (1),
moving the footplate (2) forwards
or backwards and aligning the
holes in the footplate with the
holes in the receiver (3). Replace
the screws and tighten as above.
1 2
3
4