44
2 Millennium Issue 7
Axle
Fig. 68
Quick release axles
To remove quick release axles
(Fig. 68) simply press the quick
release cap (1) which is located in
the wheel hub (2), and grip the
wheel through the spokes (3)
around the hub and pull the axle
out of its sleeve (4). To replace,
slide the axle into the sleeve until
the release cap ‘pops’ out and the
two locking pins (5) are visible on
the inside (6) of the sleeve.
Warning:
The axle is not secure until the
outside quick-release cap pops out to
its fully extended position, and the
locking pins (5) on the inside of the
axle are in the locked position.
1
2
3
4
5
Wheelbase width
The wheelbase width is adjusted by
loosening the outer 28mm A/F axle
sleeve nut (1), using an adjustable
spanner, and positioning the axle
sleeve (2) where required. The nut
must be tightened using a torque
spanner to 81Nm torque (Fig. 67).
Ensure washer (3) is present
before tightening the nut (1).
1
2
Fig. 67
3
Содержание QUICKIE 2 Millenium
Страница 1: ...Owner s Manual EN G LISH 2 Millennium...
Страница 2: ...63 2 Millennium Issue 7...
Страница 61: ...57 2 Millennium Issue 7...
Страница 62: ...58 2 Millennium Issue 7...