Sunrise Medical E1161 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

background image

Zippie

®

SPHYNX

252843 Rev. B

16

8.0 USE AND MAINTENANCE

L. SEATING AND SEAT SLING UPHOLSTERY

1. Seat Sling Upholstery

a.

Check monthly for excessive stretching of the upholstery, or loose attaching hardware. If you

determine the upholstery can no longer be adjusted tight, contact your Sunrise Medical

Authorized Dealer for a replacement.

2. Cushion Attachment

a.

Place cushion on the seat sling with loop material side down. The beveled edge of the cushion

should be facing toward the front of your chair. Cushion will fold over the front of the seat sling

and attach to the Velcro

®

underneath the seat sling. (Fig. 8.13)

b.

Press ﬁ rmly into place.

WARNING

Loose or worn seat slings may sag to a point that they contact chair components positioned under the
seating surface. Using the chair in this condition may lead to pressure related injuries.

M. ADJUSTING RECLINE ANGLE (Back to Seat angle)

1.

Pull both latch handles halfway up until they contact the recline stop tab as shown in Fig 8.14. While
holding the latch handles in this position, pull or push the backrest to your desired back-to-seat angle.

2.

Check the recline angle marking on the side of the seat frame to ensure you are at the desired angle.

Possible back-to-seat angles are 85°, 90,° 95,° and 100°. (Fig 8.15)

3.

Conﬁ rm that recline angle is positioned at the same setting on both sides of the chair.

WARNING

Ensure both recline latch pins are fully engaged. If not fully engaged, lightly rock backrest back and forth until
fully engaged. (Fig 8.16)

WARNING

Do not attempt to recline the backrest with the latch handle in the folding position, as you may
inadvertently unlock the frame. If this happens and the frame is not returned to the lock position,
completely fold and unfold the frame to return it to the lock position. Always check that the tilt link front
pivot is in the lock position as indicated on the seat frame prior to use. (Fig 8.15)

8.13

8.13

8.14

Recline

Stop

Tab

8.16

INCORRECT:
gap = not fully engaged

CORRECT:
no gap = fully engaged

8.14

8.15

8.16

8.15

In lock position

Recline angle settings

«
...
14
15
16
17
18
...
»

Содержание E1161





























Отзывы:

Нет отзывов

Похожие инструкции для E1161

Бренд: Accora Страницы: 3

Бренд: AAT Страницы: 36

Бренд: AAT Страницы: 64

Бренд: R82 Страницы: 7

Бренд: R82 Страницы: 5

Бренд: Karma Страницы: 44

Quickie S-646 SE

Бренд: Quickie Страницы: 42

Бренд: CareCo Страницы: 10

Бренд: CareCo Страницы: 10

Бренд: Jay Страницы: 32

Nielsen Line 313001

Бренд: HMN Страницы: 8

Бренд: HMN Страницы: 16

Бренд: HMN Страницы: 20

Бренд: Van Os Medical B.V. Страницы: 33

Бренд: TransMotion Medical Страницы: 30

Бренд: Veldink4kids Страницы: 53

MOPEDIA RC325-40

Бренд: Moretti Страницы: 48

Бренд: Permobil Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды