background image

Dealer signature and stamp

Your wheelchair will reach you in excellent condition having 

been personally inspected before leaving our factory. 

Following the guidelines for maintenance and cleaning your 

wheelchair will maintain its first class condition and give you 

complete satisfaction
The wheelchair has been designed for use by an individual on 

a daily basis. It is suitable for both indoor and outdoor use. It 

is only intended for use as a pavement vehicle, but may also 

be used when crossing between pavements.

It is very important to read the relevant section of the owner’s 

manual when making any minor adjustments. Consult your 

local Sunrise Medical authorized dealer for more complex 

adjustments.
If you have any q

uestions

 about the use, maintenanc

,

 or 

safety of your wheelchair, please contact your local approved 

Sunrise Medical service agent. If you do not know of an 

approved dealer in your area or have any other questions 

please write or telephone.

Sunrise Medical (US) LLC

Customer Service Department

2842 N. Business Park Ave

Fresno, CA 93727 USA

(800) 333-4000

You can also register your wheelchair at: 

www.sunrisemedical.com/register or use the quick response 

code below.

FOR  ANSWERS  TO  YOUR  QUESTIONS

Supplier: __________________________________________

Address: __________________________________________

_________________________________________________

Telephone: ________________________________________ 

Serial #:______________ Date/Purchased:_______________

www.sunrisemedical.com/register

DISPOSAL AND RECYCLING INFORMATION

Ensure you are the legal owner of the product prior to 

arranging for the product disposal in accordance with the 

above recommendations.

247556 Rev. A

2

Q700-UP M

Your 

a

uthorized 

d

ealer knows your wheelchair best, and can 

answer most of your questions about system safety, use and 

maintenance. For future reference, fill in the following:

We at Sunrise Medical want you to get the best out of your 

wheelchair. This Owner’s Manual will familiarize you with the 

chair and its features. It contains hints on everyday usage and 

general care in addition to information on the high quality 

standards which we adhere to and details about the 

guarantee.
Your wheelchair should be delivered fully configured for your 

use; there are a wide range of components and adjustments 

available. For further information about these you should 

contact your Sunrise Medical authorized dealer.

Thank you for choosing a Quickie Power Chair.  We want to 

hear your questions or comments about this manual, the 

safety and reliability of your system, and the service you 

receive from your Authorized Dealer. Please feel free to 

write or call us at the address and telephone number below:

Be sure to return your warranty card, and let us know if you 

change your address. This will allow us to keep you up to 

date with information about safety, new products, and 

options to increase your use and enjoyment of this system. 

When this product reaches the end of its life, please take 

it to an approved collection or recycling point designated 

by your local or state government.  This Seating system is 

manufactured using a variety of materials

.

  Your product 

should not be disposed of as ordinary household waste.  

You should dispose of your system properly, according to 

local laws and regulations.  Most materials that are used in 

the construction of this product are fully recyclable.  The 

separate collection and recycling of your product at the 

time of disposal will help conserve natural resources and 

ensure that it is disposed in a manner that protects the 

environment.

This vehicle has been designed for a single occupant of 

limited mobility who has the cognitive, physical and visual 

ability to control the vehicle safely.  See page 

8

 for maximum 

user weights. 

 

If you are in any doubt as to the suitability of 

the wheelchair, contact your local Sunrise Medical approved 

supplier for clarification, prior to commencing use.

INFORMATION  YOU  SHOULD  KNOW

No component of this system was made with Natural Rubber Latex.

Содержание 247556





































Отзывы: