•
•
• To adjust the horizontal position, loosen the screws at the
headrest upholstery , position the headrest as required and
tighten the screws securely.
DANGER!
A
A
CAUTION!
DANGER!
A
B
F
ig. 5.1
5
F
ig. 5.1
6
F
ig. 5.14a
Fig. 5.14b
F
ig. 5.1
4
Shift Piece Adjustment
U
nderside of
Seat
U
nderside of Seat
2
47556 Rev. A
18
Q700-UP M
When a bigger seat depth is required ensure that the cables are
lengthened before the mechanical adjustment takes place.
We strongly recommend that you contact your Sunrise Medical
approved
authorized dealer
to adjust the seat depth, because
adjusting the seat depth will affect the center of gravity.
The headrest height is changed by pushing the set stop and
sliding the headrest to the desired height (Fig. 5.1
5
)
.
The headrest forward and back position, height and angle
can all be adjusted by loosening the hinge bolts (A) with a
5mm Allen key. Move the headrest to the desired position
and tighten the bolts securely
(Fig. 5.1
6
).
• Never use the chair without a headrest if a person is
transported with the chair in a vehicle.
• If a headrest is part of the options selected for the user/
chair, never drive the chair without the headrest attached.
5
.
8
S
et seat depth, (Fig.
5
.1
4)
5
.8.1 Q700-UP M (Standard), (Fig. 5.14, a, and b)
•
Remove the two screws (B) from the armrest linkage.
•
The back assembly can now be adjusted.
•
Align the back so it is lined up with a number on the
shift piece. Align the armrest linkage to the same
number and reattach the bolts. (Fig. 5.14 a and b).
•
Add the screws back to the bottom of the double tilt
module in the two available holes.
• Use a 5.0 mm Allen Key.
• Remove the 2 screws, (A), on the bottom of the double tilt
module.
5
.9
Set headrest