Sunrise Manufacturing International Wings Series, Руководство пользователя

Страница: 69 / 118

Separate the nose, one half on the side,
center cell in the middle and second half
on the other side.
Quarter the slider by placing the section
between the B-C attachment points away
from the center of the parachute and
separating the front and rear portions in
a similar position.
Repeat this process on the other side of
the canopy.
Slowly wrap the tail around the line
groups. Begin to roll the tail carefully be
sure not to disturb the canopy. Keep the
roll tight and make enough turns until the
top skin appears tight and able to hold
the cocoon shape.
Fold the remaining material on top of the
first “S”-fold.
21
The first “S”-fold should be
approximately 1/3 of the canopy
material.
Gently lay the canopy on the floor. Keep
the lines tight and do not disturb the pack
job.
Carefully lay on the canopy to remove as
much excess air out of it as possible.
Do not allow the canopy to bellow out.
After tightening the cocoon to the width
of the Deployment Bag, start to “S”-fold
the parachute.
Sunrise Manufacturing International, Inc.
WINGS MANUAL