Sunrise Manufacturing International Wings Series, Руководство пользователя

Страница: 59 / 118

11
5.8 Flat Pack Method of the Main
Parachute.
Read and follow the instructions for
stowing the Main Steering Toggles on
pg 10.
Grasp the rear line and control line groups
in the LEFT hand and the front line groups
in the RIGHT hand.
Walk towards the parachute, leaving the
slider at the top of the risers, separating the
line groups as you go.
Once at the stabilizer edge, shake the
parachute from side to side.
While maintaining control of the line groups,
lay out the parachute in front of you and
away from the harness/container assembly.
Maintaining line tension will help in later
steps.
With tension on the A- and B-line groups,
fold the B- line section on top of the A-
lines.
With tension on the A-line groups, fold the
leading edge under the A-line group.
Walk to the top of the canopy and:
Count and flake out the cells leading edges.
Count and flake out the B-line seams.
Count and flake out the C-line seams.
Count and flake out the D-line seams.
Count and flake out the control lines and the
remainder of the trailing edge of the canopy.
Sunrise Manufacturing International, Inc.
WINGS MANUAL