Sunrise Manufacturing International Wings Series, Руководство пользователя

Страница: 19 / 118

3
Sunrise Manufacturing International, Inc.
WINGS MANUAL
4.1.2 Reserve Parachute

Links should be:

Clean of corrosion, debris and without cracks or visible damage.

No sharp or raw edges.

Free moving barrel, which should be able to tighten 2 ¾ turns from first
engagement of the barrel without resistance.

Rapide Link Covers

Covers should be firmly seated on top of links.

Covers tacked in place to prevent slippage.

Lines

No excessive fraying or damage to lines.

Continuity is correct.

Bartacks sewn correctly on each line.

Each line is without twists and correctly installed from link to parachute,
passing through the correct slider grommet.

Slider

Slider is without holes, burns, or other damage.

Reinforcement tape in place and secure.

Grommets seated correctly without burrs or damage.

Bottom Skin

Inspect each cell for any tears, fraying or other damage.

Seams and attachment points stitched correctly and evenly.

Ribs

Cross ports without damage.

Stitching correct on seams.

Reinforcing tape present on loaded ribs.

No other damage on entire rib section.

Top Skin

Seams are sewn correctly.

Leading edge bar tacks are in place.

Control line attachment points are reinforced.

Stabilizers

Slider stops are present and secured.

Lines bar tacked to lower edge of stabilizer.

Slack is present in stabilizer when line is taut.