Sunrain YC-007TB1, Руководство по установке и эксплуатации, Страница: 18 / 32

- 16 -
2 up 1. Press at main interface to set the temperature.
2. Press and hold for 3 seconds in the power on/off
state to enter the query state.
3. In the query status, press and check status
4. At parameter set status, press to modify parameters
3 down 1. Press at main interface to set the temperature.
2. Press and hold for 3 seconds in the power on/off
state to enter the query state.
3. In the query status, click to status query
4. Under parameter setting state, click parameter to
modify
4 Mode
button
1. In the main interface, press and hold for 3 seconds to
start (and enter zero cold water time setting) / turn off
the timing zero cold water function; (when parameter
64=1)
2. In the main interface, short press for more than 1
second to cancel the zero cold water function in this
period; (when parameter 64=1)
3. In the main interface, short press within 1 second to
activate/deactivate the manual zero cold water
function. (when parameter 64=1)
4. Under the main interface, click to switch between
heating and cooling operation status (when parameter
64=0)
5 time
1. In the main interface, press to enter the clock setting,
and press to switch time “hour” and “minute”.
2. In the main interface, press and hold for 3 seconds to
start (and enter the timing time setting) / turn off the
timing mode.
6 set
1. Under the main interface, press to switch between
automatic/manual temperature control mode. “AUTO”
is displayed in the automatic mode and is not displayed
when manual
2. In the main interface, press and hold for 3 seconds to
enter the parameter interface.
7
Button
combinati
on
“ ”+“
”
at main interface when ON, press and hold for 3
seconds to turn on/off quick heating
“ ”+“
”
at main interface when ON,press and hold for 3
seconds to turn on/off defrosting
“ ”+“
”
Within 5 minutes after power-on, at the main interface
of shutdown, press and hold for 10 seconds to
enter/exit refrigerant charging or recycling mode
“ ”+“
”+“ ”
Under the main interface, press and hold for 10
seconds to turn on/off the “sterilization” function
manually (Parameter 66=1 is valid)