-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
19
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
UFO 3 INSTALLATION (2019.12.23) V1
9. Secure the extension tube shied
with
extension
tube
shield
M6x16L 4 bolt kit after fasten
the all the safety cables and
wires. Be careful and do not
damage the wiring.
Notes
：
Fasten one side first with 4
sets of extension tube shied blot
kit while installing on extension
tube.
(Recommended Tightening
Torque
：
5 N.m(50 Kgf.cm))
10-1
Prepare 4 guy wires with
Ø4mm when installation. (The
technician needs to prepare
guy
wire
,and
tailor
it
according to the situation)
10-2
Looking up from the bottom
of ceiling fan, the angle
between
each
cable
and
I-beam is recommended to be
45-degrees.
10-3
The angle of the cables
should be 45 degrees angle
from horizontal surface.
