-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
UFO 3 INSTALLATION (2019.12.23) V1
CAUTION & SAFETY
WARNING - TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING
：
1.
Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards.
2.
Do not damage existing wiring and other hidden utilities/devices when cutting or
drilling into a wall or ceiling.
3.
Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer.
4.
Mounting of the suspension system and replacement of parts of the safety
suspension system shall be performed by the manufacturer, its service agent, or
suitably qualified persons.
5.
Do not operate any fan with a damaged cord or plug. Please contact manufacturer
and qualified technician for examination and/or repair.
6.
Before servicing or cleaning unit, turn off all the power switches to prevent power
from being switched on accidentally. When the circuit breaker cannot be locked,
securely fasten a prominent warning device, such as a tag, to the service panel.
7.
SUNON provides installation guide for mounting fans; however, it is the sole
responsibility of the building owner and installer to ensure the safety of the
mounting system, that the building structure is sound and that the installation
complies with all federal, state, and local codes.
8.
While turning on power to the fan, please use it with caution. DO NOT connect the
fan to a damaged/dangerous power source. DO NOT attempt to resolve electrical
problems by yourself. Please SEND the fan back to authorized service center for
examination and/or repair. If there is any question with installation, please
contact customer service.
9.
When service or replacement of a fan component requires the removal or
disconnection of a safety device, the safety device is to be reinstalled or
remounted as previously installed.
10.
Do not bend the airfoils when installing, servicing, or cleaning the fan. Do not
insert foreign objects between rotating airfoils.
