SPQ0165
Page 1 / 2
SPIRALING SLATE FREESTANDING
WATER FOUNTAIN WITH LED SPOTLIGHT
GSI-790
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Note
: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
01/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
NOTE:
The water tubing is built into the
fountain body. Take care when handling the
water tube; detaching the water tube from the
fountain will damage the fountain and void the
product warranty.
No.
Parts
Qty.
A
Fountain Body
1
B
Spotlight with AC Adapter
1
C
Light Plate
1
D
Basin
1
E
Washer
2
F
Bolt
2
G
Decorative Stones
1
PK
H
Electric Submersible Pump
1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
ASSEMBLY
1.
Place the spotlight in the basin and run the cord out the groove in the back of the basin. Firmly connect the
AC adapter.
2.
Connect the pump to the fountain body. Gently place the assembled components onto the basin, ensuring
the pump power cord runs out the groove in the back of the basin. Secure the fountain body to the basin
with the washers and bolts.
3.
Take the light out of the basin. Place the light plate onto the fountain body and set the light on the plate.
4.
Gently place the decorative stones in the basin.
5.
Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.
6.
Plug the power cords into properly grounded GFCI outlets.
