10
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE BALANCE
To achieve a smooth and comfortable ride, you must ensure
that the stability of the elliptical is secured. If you notice that
the elliptical is unbalanced during use, adjust the
End Caps
(No. 37)
located on the rear stabilizer until the elliptical
becomes level with the floor surface.
ADJUSTING THE TENSION
Adjust the tension by rotating the
Tension Control Knob
(No. 53)
clockwise
to increase the level of resistance. Rotate
the
Tension Control Knob (No. 53)
counter-clockwise
to
decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level 8
being the highest.
4
34
MOVING THE ELLIPTICAL
To move the elliptical, hold
Middle
Handlebars (No. 4)
and
tilt the elliptical until the Movable Wheels on the
End Caps
(No. 34)
located on the front stabilizer touch the ground. With
the wheels on the ground, you can transport the elliptical to
the desired location with ease.
CLEANING
The elliptical can be cleaned with a soft, clean, and damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the elliptical after each use. Be
careful not get excessive moisture on the computer display panel as this might cause
electrical hazard or electronics to failure.
Please keep the elliptical, especially the computer out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the elliptical for proper tightness every
week.
STORAGE
Store the elliptical in a clean and dry environment away from children.
