background image

IMPORTANT ELECTRICAL INFORMATION 

 
 

IMPORTANT NOTE:

 This treadmill requires a power source of 

18 amps (110 Volts)

 in 

order

 

to properly operate. For your safety, as well as the safety of others, please verify 

that  the  power  source  is  correct  before  powering  the  equipment.  Any  power  supply 
source  above  or  below  this  level  could  cause  significant  damage  to  the  equipment 
and/or user. 

 
GROUNDING METHODS: 

This  product  must  be  grounded.  If  the  treadmill  should  malfunction  or  breakdown, 
grounding  provides  a  path  with  the  least  resistance  of  electric  current,  which  reduces 
the risk of electric shock. This product  is equipped with a plug that  has an equipment-
grounding  conductor  and  a  grounding  plug.  The  plug  must  be  plugged  into  an 
appropriate  outlet  that  is  properly  installed  and  grounded  in  accordance  with  all  local 
codes and ordinances. 

 
 
 
 
 
 
 
 

 
 
CAUTION:

 

Improper connection of the equipment can result in risk of electric shock. Check with a 
qualified  electrician  or  serviceman  if  you  are  unsure  whether  the  product  has  been 
properly grounded. Do not modify the plug provided with this product. If it will not fit the 
outlet, have a proper outlet installed by a qualified electrician. Ensure that the product is 
connected to an outlet with the same configuration as the plug. Do not use an adaptor 
for this product. 
 

WARNING: 

 

DO NOT

 use a ground fault circuit interrupt (GFCI) outlet with this treadmill. Route the 

power  cord  away  from  all  moving  parts  of  the  treadmill,  including  the  Air  Pressure 
Cylinder and transport wheels. 

 

DO NOT

 operate the treadmill using a generator or UPS power supply. 

 

DO NOT

 remove any cover on this treadmill without first disconnecting the power cord. 

 

DO  NOT

  expose  the  treadmill  to  rain  or  moisture.  This  treadmill  is  not  designed  for 

outdoor use or in any high humidity environment. 

 

 

12 

Grounded 
outlet 

Grounding Pin 

 

Содержание SF-T7513


























Отзывы: