7
BATTERY:
Prior to first use of the product you have to install the battery. If the display is not working
properly, change the battery.
To change the battery, remove the meter from the handlebar. The battery compartment is
located at the back of the meter. After you change the battery, put the meter back on the
handlebar. Dispose of old battery according to your State and Regional guidelines.
METER INSTRUCTIONS
MODE
Press to select each function.
RESET
Press and hold for 3 seconds to reset all values.
SCAN
Automatically displays each function in sequence for a few seconds each.
TIME
Counts from 00:00 up to 99:59 in one-second increments.
CALORIES
Accumulates the calorie consumption during your exercise. This is a rough
guide and should only be used as a comparison figure over several exercise
sessions.
COUNT
Accumulates the numbers of strides during a work-out session.
Meter counts 1 stride after you step once with each foot.
STRIDES/MIN
Displays strides per minute.
1.
To turn on the meter, press any button or start exercise.
2.
After 4 minutes of inactivity, the meter will shut off automatically.
Version 1.2
