background image

 

IMPORTANT SAFETY INFORMATION 

 

We  thank  you  for  choosing  our  product.  To  ensure  your  safety  and  health,  please  use  this 
equipment  correctly.  It  is  important  to  read  this  entire  manual  before  assembling  and  using  the 
equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained 
and used properly. It is your responsibility to ensure that all users of the equipment are informed of 
all warnings and precautions. 

 

1.  Before  starting  any  exercise  program,  you  should  consult  your  physician  to  determine  if  you 

have any medical or physical conditions that could put your health and safety at risk, or prevent 
you from  using  the equipment  properly.  Your  physician’s  advice  is essential  if  you  are taking 
medication that affects your heart rate, blood pressure or cholesterol level. 

2. 

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop 
exercising  if  you  experience  any  of  the  following  symptoms:  pain,  tightness  in  your  chest, 
irregular heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you 
do experience any of these conditions, you should consult your physician before continuing with 
your exercise program. 

3.  Keep children and pets away from the equipment. The equipment is designed for adult use only. 
4.  Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. 

To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it. 

5.  Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of 

the equipment can only be maintained if it is regularly examined for damage and/or wear and 
tear. 

6.  Always use the equipment as indicated. If you find any defective components while assembling 

or checking the equipment, or if you hear any unusual noises coming from the equipment during 
exercise, discontinue use of the equipment immediately and do not use until the problem has 
been rectified. 

7.  Wear  suitable  clothing  while  using  the  equipment.  Avoid  wearing  loose  clothing  that  may 

become entangled in the equipment. 

8.  Do not place fingers or objects into the moving parts of the equipment. 
9.  The maximum weight capacity of this unit is 240 pounds (110 KG). 
10. The equipment is not suitable for therapeutic use. 
11. To  avoid  bodily  injury  and/or  damage  to  the  product  or  property,  proper  lifting  and  moving  is 

required. 

12. Your product  is intended for use in  cool, dry conditions.  You should avoid  storage in  extreme 

cold, hot or damp areas as this may lead to corrosion and other related problems. 

13. This equipment is designed for indoor and home use only, it is not intended for commercial use! 

 
 
 

Содержание SF-B2883





















Отзывы: