SUNNEX PF MRI Series, Инструкция по установке и обслуживанию

Страница: 14 / 28

Sunnex PF Series MRI Service & Installation Manual
14
4. Turn on light
•
The ON/OFF switch should be used to turn the light on and off. It is
located at the back side of the lamp head.
•
When light is not in use, turn it off, also unplug the hospital grade plug
from the hospital grade socket when light is not in use. A mains switch
is not provided on the electrical box.
•
The PF series light, being a mobile light can be moved on its wheels by
holding the vertical light pole. Before moving the light, ensure that all
lamp arm joints are tightened properly.
CAUTION !
The electrical box is specifically made to run the PF series MRI
light (PF 28016-M) in an MRI environment. A power supply different than this
should
NEVER be used to operate the light.
CAUTION! The caster base is weighted for stability, but the arm should not
be locked in a fully extended horizontal position as this may compromise the
stability of the fixture.
6. SERVICE AND MAINTENANCE
While your PF SERIES MRI light has been designed to provide you many
hours of professional performance, it will benefit from your periodic care and
concern. Your MRI facility guidelines must be
strictly followed at all times.
Please consult with your facility manager.
Detachable parts
Lamp head: lens cover, lens, O-ring, lens cover screws, bulb
Light assembly: light pole, light arm, caster base, caster wheels, counter
weight
Electrical box: light cord connector and electrical box receptacle
CAUTION! In the event, parts need to be replaced, only Sunnex parts
should be used as replacements, use of other parts or materials can
degrade safety. Also, there are no user-serviceable parts in the PF
series MRI light. The product should be returned to Sunnex in case
service is required.