Li.ONESS Batteries
| Operation, Safety and Installation Manual
4
1.2 Scope
The following parts are included in the scope of the
supply:
•
Li.ONESS Lithium-Ion battery system
•
Documentation (Operating, Safety and Installation
Instructions)
•
External multi-functional display (Telecommunication
Box)
After unpacking the parts, please examine them for
possible damage. If any damage is found, please do
not use the product; if in doubt, please contact the
manufacturer.
1.3 Precautions
BEFORE UNPACKING, STORING, HANDLING,
INSTALLING, OPERATING ΤΗΕ BATTERY
SYSTEM READ THE FOLLOWING INFORMATION
THOROUGHLY!
It is important to read, understand and strictly follow
the instructions in this manual.
If the following precautions are not fully understood,
or if local conditions are not covered, contact your
nearest Systems Sunlight sales/service representative
for clarification, or call the corporate office number
listed on the back of this manual and ask for Sunlight
Service. Also, refer to all applicable federal, state and
local regulations and industry standards.
1.4 Product Description
A Li.ONESS battery system consists of the following
main parts:
•
The battery modules, which consist of series-
connected cells enclosed at a metallic tray. The
modules are connected in series and/or parallel
depending on the voltage and the capacity of each
battery.
•
The BMS (MAB, CMU, PBT - where applicable)
•
Contactors
•
Fuses
•
The metallic tray
•
Shunt Box (external)
•
The user interface control panel
•
Display and telecommunication box with Sunlight
cloud (GLocal)
The purpose of the battery is to deliver electric power
to AC loads, respecting the following key principles:
•
Protection from short circuits and inappropriate
charging.
•
Protection from over and under voltage.
•
Protection from over charging and discharging.
•
Protection from over and under temperature.
1.5 Environmental working conditions
•
Charging Temperature range: 0
o
C to +55
o
C
(+32
o
F to +131
o
F).
1. Introduction
1.1 Purpose of this Manual
The purpose of this document is to present the installation process for Li.ONESS 51.2V systems. It provides
all necessary information for the installation of:
●
Li.ONESS Battery Modules (51.2V/100Ah - 5.1kWh)
●
Electrical connections among Li.ONESS battery modules
●
Communication connection between Li.ONESS battery modules (CAN RJ45 connectors)
●
Telecommunication Box setup
●
Communication with inverter / charger
EN
Please keep this manual in the area of use.
All users should be familiar with the follow-
ing instructions.
