Sunjoy Stoneridge L-DN1773SST-D-T, Инструкция по сборке

Страница: 4 / 13

4 of 13
gas leak. Have the appliance inspected annually by a qualified service person.

The pressure regulator and hose assembly provided with the appliance must be used. The
replacement part must be the same as the part specified by manufacturer.

The assembly of LP-gas and leak checking please refer to the “Gas connection” on page 10 and
“Leak Test” on page 11.

Children and adults should be alerted to the hazards of high surface temperatures and should stay
away to avoid burns or prevent clothing ignition.

Young children and pets should be carefully supervised when they are in the area of the appliance.

Any guard or other protective device removed for servicing the appliance must be replaced prior to
operation.

Clothing or other flammable materials should not be hung from the appliance or placed on or near the
appliance.

Do not use the appliance if any part has been under water. Immediately call a qualified technician to inspect
the appliance and to replace any part of the control system and any gas control which has been under water.

LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifications for
LP-gas cylinders of the U.S. Department of Transportation (DOT).

The cylinder supplies system must be arranged for vapor withdrawal and the cylinder must include a collar to
protect the cylinder valve.

Use only 20 lb / 9 kg LP-Gas cylinders.

Do not burn wood or any other materials in this appliance.

The appliance must be isolated from the gas supply piping system by closing
its individual manual shutoff valve during any pressure testing of the gas supply
piping system at test pressure equal to or less than 1/2psi (3.5kPa).

That other cylinder may be acceptable for use with the appliance provided
they are compatible with the appliance retention means and accompanied by illustration(s) depicting the cylinder
mounted to the appliance utilizing the cylinder retention means and the point of contact between the cylinder and
the retention means.

Properly place the hose out of pathways where people may trip over it or in areas where there may be subject
to accidental damage.

The burner must be replaced prior to the appliance being put into operation if it is evident that the burner is
damaged. The replacement burner must be the same as the part specified by manufacturer.

The cleaning of the appliance including the burner, please refer to “Storage and Maintenance” on page 12.