background image

 

1

Royal Hardtop Gazebo 

Item#

L-GZ066PST 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

Congratulations on your purchase of our SUNJOY Royal Hardtop Gazebo. Our clear, easy to follow, 

step-by-step instructions will guide you through the asse

m

bly process from start to finish. 

 

WARNING: 

 

THIS UNIT IS HEAVY!    For safety, DO NOT assemble this item alone.    Six to eight people are recommended for safe 

assembly. 

 

Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the 

assembly area of the Gazebo. 

 

Do not assemble less than 6 ft / 1.8 m from any obstruction such as a fence, garage, house, overhanging branches, 

laundry line or electrical wires. 

 

Some parts may contain sharp edges. Wear protective gloves. 

  When assembling and using this product, basic safety precautions should always be followed to reduce the risk of 

personal injury and damage to equipment. Please read all instructions before assembly and usage. 

 

For outdoor use only. Install on level ground.

 

 

 

Check all bolts for tightness before and during usage. 

Specifications: 

Wind Rating: 

50.8 miles/hour on Soft Ground; 63.6 miles/hour on Solid Ground 

Static Load:

 551lbs/250kgs

 

Max. Load of the Center Hook:

 66.1lbs/30kgs 

 

 
 
 

 

 

 

IMPORTANT 

Please take time to read these instructions thoroughly and follow each step carefully for safe and easy 
operation. Keep this manual for future reference. 
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569 from 
8:30AM to 5:30PM EST, or email us at [email protected], or visit 

www.sunjoydirect.com

 for 

assistance. 

Содержание Royal Hardtop Gazebo










Отзывы: