7
Assembly (continued)
5
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
6
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
Attached the cant support (P) to the long and short screen
(B1/B2), by using bolt (CC) and washer (BB).
Insert cant beam end (E) into Cant beam bottom tube (G), then insert
the cant beam other end (E) into big top connector (J), attached the
cant beam bottom tube(G) to the Post (A) by using bolts (EE), washer
(BB) and nut (DD)
；
7
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
8
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
Insert the Mid beam end (F) into the mid beam bottom tube (H),
then insert the mid beam other end (F) into big top connector
(J), install the mid beam bottom tube (H) to mid beam
connector(C) by using bolt (EE), washer (BB) and nut (DD).
Insert the small top cant beam (K) into the small top connector
(L)
，
spread the big canopy(T) on big top
，
the spread the middle
canopy (S) on middle top
，
don’t spread completely
，
then insert
the small top cant beam(K) into cant beam (E) and attach the
hook (Q) to the big top connector (J).
