6
Assembly
1
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
2
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
Set stake cover (N) into the post (A), then installed stake plate
(M) on the bottom post (A) by using bolts (AA), washer (BB).
Insert the long screen end (B1) into the short screen (B2), fasten
by using Bolt ((CC), washer (BB) and Nut (DD).
3
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
4
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
Fix the mid beam connector(C) on the long screen (B1) and short
screen (B2), by using Bolt (AA) and washer (BB).
Attached the long / short screen (B1/B2) on the post (A) by using
bolt (CC) and washer (BB).
