6
Upright Canopy Before Center Pole
Mesh
Mesh
Step 4:
Go to the bottom of the stake-out webbing, which should be looped over the hook part of the stake,
and adjust the tension of the stake by pulling the free end of the stake-out webbing
(as Fig.5).
(Below the
ladder lock buckle, towards the ground. Do not over tighten. You want to have the canopy tension just enough
to support the poles.) Go to the remaining corners and repeat steps
3 and 4
. It is important to make sure all of
the door zips are fully closed at this point.
Step 5:
Go to each corner pole and raise the pole into an upright position, erecting all side walls
(as Fig.6)
.
Once each corner pole is upright, enter the canopy through one of the zippered doors and place the tip of one
of the assembled side poles through the grommet on the eave of canopy top between each corner pole, being
sure that the tip goes through grommet and the metal ring where the stake-out webbings attaches (as fig.3).
Stand the sidewall upright, and adjust the tension of the stake-out webbing as described in step 4. Repeat the
process for all pole positions along the remaining sidewalls and ends.
45°
5
Ground
Ground
Ladder Lock Adjuster
Stake(Shown with Web Strap)
