S
E(F)
(HH)
Fig.18
R
H(I)
(HH)
Fig.17
Step2
6.
Connect top short beam (F), long support beam (J), top long beam (E) and short support beam (K) using
bolt (AA), flat washer (DD), and assemble all corners before tightening. (Fig.6) Repeat on all sides.
7.
Connect top short beam (F), top long beam (E) and long support beam (J), using bolt (AA) and flat
washer (DD), assemble all corners before tightening. (Fig.7) Repeat on all sides.
8.
Connect one side of the top long beam (E) to one side of the top short beam (F), using bolt (II), flat
washer (DD) and nut (EE), assemble all corners before tightening. (Fig.8)
9.
Connect the other side of the top long beam (E) to the other side of the top short beam (F), using bolt (II),
flat washer (DD) and nut (EE), assemble all corners before tightening.(Fig.9)
10.
Connect oblique beam connector (G) and top short beam (F), using bolt (AA) and flat washer (DD),
assemble all corners before tightening. (Fig.10) Repeat for each beam.
11.
Connect short oblique beam (C) to beam connector (G), using bolt (CC), flat washer (DD) and nut (EE),
assemble all corners before tightening. (Fig.11) Repeat for each beam.
12.
Insert long oblique beam with small roof bar (B) into long pole of top connector (A) and one side of long
oblique beam (D) into short pole of top connector (A). (Fig.12)
13.
Insert one side of long beam with small roof Bar (B) into short oblique beam (C). Then connect using bolt
(AA) and flat washer (DD) and lock tight. (Fig.13)
14.
Connect long oblique beam (D) to top long beam (E) using bolt (CC), flat washer (DD) and nut (EE),
assemble all corners before tightening. (Fig.14)
Step3
O
N
GG
Fig
.
19
P
Q
Fig.
16
Fig.
15
Fig.
17
Fig.
19
Fig.
18
R
S
