background image

2

 / 

10

 

Safety information 

•Keep all children and pets away from assembly area. Children and pets should be supervised

when they are in the area of the production construction. 
•This package contains small items and plastic bags that should be kept away from children.
•Keep assembly area at least 6 ft. from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires. 
•Proper placement of your product is essential. Do not place the product underneath electrical

lines. 
•Keep fingers away from places where they can be pinched or trapped.
•Some parts may contain sharp edges, wear protective gloves if necessary during assembly.
•When assembling and using this product, basic safety precautions should always be followed

to reduce the risk of personal injury and damage to equipment. Please read all instructions 

before assembly and use. 
•Check all screws for tightness before and during usage. Ensure that all connectors and poles

are firmly and fully secured into position. It is important to do so before use so as to avoid a 

possible collapse or damage to the item, which could also result in injury. 
• This product is intended for outdoor use only. Install on flat, level ground.
•Stakes are provided to secure the gazebo in grass ground. If you wish to secure the gazebo

to a wood deck or concrete surface, you will need to purchase fasteners appropriate (such as 

expansion bolt) for these surfaces. These are readily available at your local hardware store or 

home center.   
•The gazebo’s roof and structure are not guaranteed against extreme weather conditions

(storms, high winds, etc.). If the gazebo is not dismantled for the winter, snow must be cleaned 

off regularly. Any damage caused by snow accumulation is not covered by the warranty. 
•Do not use the unit during an electrical storm, as there is a remote chance of getting struck by

lightening. 
•Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will

occur to the structure. Remove fabric roof and secure screen & privacy panels. 
•Warranty does not cover damage due to extreme weather conditions.
•Please check your state and local regulations prior to purchasing. Some jurisdictions may

require permits for, or otherwise regulate, installation and use. 
•Do not grill under this gazebo.

Warning 

Keep all flame and heat sources away from this tent fabric. 

This tent meets the 

flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with 

any flame source. The application of any foreign substance to the tent fabric may render the 

flame-resistant properties ineffective. 

Assembly Preparation 

• Please read and understand this entire manual before attempting to assemble or install the

product. Keep this manual for future reference. 
• Keep the original packaging to store the product.
•Before beginning assembly of product, make sure all parts are present. Do not attempt to

Содержание A101012900











Отзывы: