8
/
10
Fig.7:
Insert the Slanting bar (G1) into the Bottom tube of slanting bar (G2)
Fig.8:
Insert the other side of Slanting bar (G1) into the Big top connector (L)
Fig.9:
Attach the Bottom tube of slanting bar (G2) to the Lower connector of slanting bar (J) by using
Bolt (FF), Washer (BB) and Nut (DD).
Fig.14
：
Put the Small canopy (S1) on the small top and attach four corners of the small canopy tightly
to the end of the Slanting bar of small top (M).
Fig.15
：
Screw the Finial (P) into the Small top connector (O)
Fig.16
：
Attach the assembled small top into the big top by inserting the tube of the Slanting bar of
Small top (M) into the tube of the Slanting bar (G1).
Fig.10:
Insert the Long middle bar (H1) into Bottom tube of long middle bar (H2), Insert the Short middle
bear (I1) into the Bottom tube of short middle bar (I2).
Fig.11:
Insert the other side of the middle bar (H1, I1) into Big top connector (L), then screw the Hook
(N) into the big top connector.
Fig.12:
Attach the Bottom tube of short middle bar (H2, I2) to Lower connector of middle bar (K) by
using Bolt (FF), Washer (BB) and Nut (DD), put the Big canopy (S2) on the big top without spreading it
out.
Fig.13:
Insert the small top slanting bar (M) into Small top connector (O)
