6
Unpacking
Carton Contents
• Electric steam cleaner
• Large cleaning brush + cotton cloth
• Window/Tile squeegee
• Nylon utility brush
• Copper utility brush
• Jet nozzle
• Extension tubes (2)
• Wallpaper steam plate
• Trigger gun
• M Registration card
1. Carefully remove the electric steam cleaner and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the steam cleaner.
The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
This unit comes fully assembled and requires 2 AAA Alkaline
batteries. This unit cannot operate without the batteries.
1. Use a screwdriver to remove the battery cover on the
bottom of the unit. Insert 2 AAA Alkaline batteries.
Place the cover back onto the battery compartment and
screw it back into place (Fig. 1).
NOTE: Remove the batteries when putting the unit into
long-term storage to prevent leaking.
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
m
WARNING!
To prevent personal injury, make sure the
switch is in the OFF position before attaching or removing any
attachments.
Changing Brush Attachments
1. Press and hold the release button on the trigger gun to
attach: the large cleaning brush, squeegee,
jet nozzle, extension tubes, or wallpaper steam plate.
Press the release button on the trigger gun while sliding
on the attachment until it clicks into place (Fig. 2).
2. To attach either of the brush attachments, align the
notches on both the brush and the jet nozzle and snap
together (Fig. 3).
3. To detach the accessories, push the release button on the
trigger gun and slide the attachment off the trigger gun
(Fig. 4).
Fig. 1
BOTTOM OF THE UNIT
Battery
compartment
Fig. 2
Release button
Attachment
Trigger gun
Fig. 3
Jet nozzle
Brush
Notches
Содержание STM30E
Страница 16: ...sunjoe com ...