background image

9

3. 

The edger guide + flower guard can be flipped up so it 

stores against the motor housing for convenient storage, 

when not in use (Fig. 6).

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery 

pack is completely sealed and maintenance free.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking 

the charge level. Simply press the push button to read off the 

battery charge level from the LEDs of the battery indicator:

•  All 4 level monitoring LEDs are lit: Battery charge level 

 

is maximum.

•  3 level monitoring LEDs are lit: Battery charge level 

 

is high.

•  2 level monitoring LEDs are lit: Battery charge level is 

decreasing. Stop work as soon as possible.

•  1 level monitoring LED is lit: Battery is flat. Stop work 

IMMEDIATELY and charge the battery. Otherwise the 

battery’s service life will be greatly shortened.

NOTE: If the charge level button does not appear to be 

working, place the battery pack on the charger and charge as 

needed.
Immediately after using the battery pack, the charge level 

button may display a lower charge than it will if checked a few 

minutes later. The battery cells “recover” some of their charge  

after resting.

Charger Operation

m

WARNING! 

Charge only EcoSharp

®

 LITE iBAT20-LTE 

lithium-ion battery packs in compatible EcoSharp

®

 iCHRG20 

lithium-ion battery chargers. Other types of batteries may 

cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow 

into the charger.

When to Charge the EcoSharp

®

 LITE 

iBAT20-LTE Lithium-Ion Battery

NOTE: The EcoSharp

®

 LITE iBAT20-LTE lithium-ion battery 

packs do not develop a "memory" when charged after only a 

partial discharge. Therefore, it is not necessary to run down the 

battery pack before placing it into the charger. 

•  Use the battery charge indicator lights to determine when to 

charge your EcoSharp

®

 LITE iBAT20-LTE lithium-ion  

battery pack. 

•  You can "top-off" your battery pack's charge before starting 

a big job or after a long day of use.

Fig. 5

Curved ends of 

edger guide + 

flower guard

Small hole on the 

housing

Fig. 6

Charge level button 

The battery is at 25% capacity 

and requires charging

The battery is at 50% capacity 

and requires charging soon

The battery is at 75% capacity

The battery is at full capacity

Light Indicators

Lights

Содержание 20ViONLTE-ST11-RM

























Отзывы: