User Manual
11
Rebuilding Virtual Disk
This topic describes the procedure to manually rebuild a degraded virtual disk. This is
applicable to the RAID 1 virtual disk created with PCIe SATA controller.
Note:
The SATA card’s BIOS supports manual rebuilding of RAID 1 virtual disks. The rebuild
process is both initiated and completed in the BIOS. The Marvell RAID Utility (MRU),
which runs in an OS environment, cannot be used to either initiate, resume, or
complete the rebuild process. Spare physical disks are not supported.
1.
When a virtual disk is degraded, the Status of a virtual disk is changed from
Functional to Degrade, as shown in below picture.
