User Manual
10
Erasing RAID Configuration Data
This topic describes the procedure to erase RAID configuration data (if any) on a
foreign
physical disk.
1.
In the Topology pane, select Physical Disk (VD 0: Default > PD 0:
ST3750330MS in
the example) and press Enter. A menu pops-up, as shown in below picture.
2.
Select Erase RAID Config Data to erase the RAID configuration data.
3.
Select Yes when prompted to confirm the operation.
WARING
If the physical disk was originally part of another virtual disk,
using Erase RAID Configuration Data may damage that
virtual disk.
WARING
Be sure to press F10 to save BIOS configuration settings,
before quitting from BIOS utility.
