27
9
Protocol Settings
9.1
Modbus Service Settings
F
Fu
un
nc
cttiio
on
n D
De
essc
crriip
pttiio
on
n
This function is used to configure Modbus service of the UMCG.
S
Se
ettttiin
ng
g M
Me
etth
ho
od
d
Click "Protocol" -＞ "Modbus service settings", to enter the corresponding interface.
•
Select the tab "Forwarding service cfg." to view the corresponding information.
•
Click the tab "Network port", click "Edit" in the operation bar, fill in information on the
pop-up window according to requirements, and click "Sure".
If the access IP is set to "0.0.0.0", any background devices with valid IP
address can access the UMCG; and if the access IP is set to a specific
address, only the corresponding device can access the UMCG.
9.2
IEC104 Service Settings
F
Fu
un
nc
cttiio
on
n D
De
essc
crriip
pttiio
on
n
This function is used to configure IEC104 service of the UMCG.
S
Se
ettttiin
ng
g M
Me
etth
ho
od
d
Click "Protocol" -> "IEC104 service settings", to enter the corresponding interface, on
which you can perform settings as you need.
If the access IP is set to "0.0.0.0", any background devices with valid IP
address can access the UMCG.
If the access IP is set to a specific address, only the corresponding device can
access the UMCG.
Содержание UMCG
Страница 2: ......
