3
Damage to the product caused by incorrect wiring is not covered by the warranty.
•
Electrical connection must be performed by professionals.
•
All cables used in the PV generation system must be firmly attached, properly
insulated, and adequately dimensioned.
Check the positive and negative polarity of the PV strings, and connect the PV con-
nectors to corresponding terminals only after ensuring polarity correctness.
During the installation and operation of the inverter, please ensure that the positive
or negative poles of PV strings do not short-circuit to the ground. Otherwise, an
AC or DC short-circuit may occur, resulting in equipment damage. The damage
caused by this is not covered by the warranty.
Comply with the safety instructions related to PV strings and the regulations re-
lated to the local grid.
1.4
Operation Safety
•
When the inverter is running, do not touch its enclosure.
•
When the inverter is running, it is strictly forbidden to plug and unplug any con-
nector on the inverter.
•
When the inverter is running, do not touch any wiring terminal of the inverter.
Otherwise, electric shock may occur.
•
When the inverter is running, do not disassemble any parts of the inverter. Oth-
erwise, electric shock may occur.
•
When the inverter is running, it is strictly forbidden to touch any hot parts of the
inverter (such as the heat sink). Otherwise, it may cause burns.
•
If the inverter is equipped with a DC switch, do not operate it when the inverter
is running. Otherwise, device damage or personal injury may occur.
User Manual
Содержание SG320HX
Страница 2: ......
Страница 6: ......
Страница 10: ......
Страница 127: ...www sungrowpower com Sungrow Power Supply Co Ltd...