Sungrow SG30CX, Руководство пользователя

Страница: 109 / 113

99
Parameters SG30CX-NI SG50CX-NI
PID recovery function
Yes
DC Terminal Protective
Cover
Yes
Arc fault circuit interrupter
(AFCI)
/
Surge protection
DC Type II / AC Type II
General Data
Dimensions (W*H*D)
702×595×310mm 782×645×310mm
Weight
50kg 62kg
Topology Transformerless
Degree of protection IP66
Night power consumption ≤2 W
Operating ambient tempera-
ture range
-30 to 60 ℃ (> 45 ℃ derating)
Allowable relative humidity
range
0 - 100%
Cooling method
Smart forced air cooling
Max. operating altitude
4000 m (> 3000 m derating)
Display
LED, Blu App
Communication
RS485 / WLAN / Optional: Ethernet
DC connection type
MC4 (Max. 6 mm 2 )
AC connection type
OT or DT terminal (Max.70 mm 2 )
Grid Support
Q at night function, LVRT, HVRT, active & reactive power
control and power ramp rate control
Country of manufacture China
(1) The inverter enters the standby state when the input voltage ranges between1,000V and
1,100V. If the maximum DC voltage in the system can exceed 1000V, the MC4 connectors
included in the scope of delivery must not be used. In this case MC 4 Evo2 connectors must
be used.
(2) For inverters without a DC switch, it is necessary to prepare an external DC switch ac-
cording to AS 60947.3.
10.2 Wring Distance of DI Dry Contact
The wiring distance between DI dry contact terminals must meet the requirements in the ta-
ble below. The wiring distance L is the total length of all DI signal cables.
User Manual 10 Appendix