User Manual
1 Safety
3
All the warning labels and nameplate on the inverter body:
y
must be clearly visible; and
y
must not be removed, covered or pasted.
Risk of burns due to hot components!
DO not touch the hot parts (such as heat sink) during operation. Only the
LED indicator panel and the optional DC switch can be touched.
Only qualified personnel can change the country setting.
Unauthorized alteration of the country setting may cause a breach of the
type-certificate marking.
Inverter damage due to electrostatic discharge (ESD).
By touching the electronic components, you may damage the inverter. For
inverter handling, be sure to:
y
avoid any unnecessary touching; and
y
wear a grounding wristband before touching any connections.
1.3
Skills of Qualified Personnel
Qualified personnel must have the following skills:
y
training in the installation and commissioning of the electrical system, as well as
the dealing with hazards;
y
knowledge of the manual and other related documents; and
y
knowledge of the local regulations and directives.
